201 Stainless Steel Streamline Tube

201 Stainless Steel Streamline Tube

Size Selection

  • Shape
    Streamline
  • Original Round Tube
    .625
  • SKU #
    201 TSL04065
  • Shape
    Egg Shape
  • Original Round Tube
    .625
  • SKU #
    201 TSL05065
  • Shape
    Egg Shape
  • Original Round Tube
    .750
  • SKU #
    201 TSL06065
  • Shape
    Streamline
  • Original Round Tube
    .750
  • SKU #
    201 TSL07065
  • Shape
    Streamline
  • Original Round Tube
    .875
  • SKU #
    201 TSL08065
  • Shape
    Streamline
  • Original Round Tube
    1.000
  • SKU #
    201 TSL09065
Total Footage*:
Size Specifications:
Streamline

A.E.D. has been producing 201 Stainless Steel Super Buffed Streamline and Oval Tubing in house for a little over 5 years. The streamline tubing produced by A.E.D. is different then “Traditional Streamline”.

Traditional streamline is produced by a cold drawn process where as our High Performance streamline is produced by a roll form process. Though the cold drawn process can produce streamline faster and in large quantities our roll forming process produces a more consistent and repeatable shape. This is due to our roll forming process being a gentile consistent operation with fixed tooling. The dies used in the cold dawning process are not fixed and are redressed to make different sizes meaning there is not much consistency from batch to batch. The cold drawn process also has a greater variable in tolerance. The roll form process also allows us more choices in the wall thickness as the streamline tubes maintains the same wall thickness as the parent round tube.

PLEASE NOTE:

We can run full lengths or as little as 6-feet.

It is important to understand that these profiles DO NOT match exactly to the old "traditional" profiles of the past. The trailing edge (small radius) is of a larger radius. If you are matching components from the past, please discuss our capabilities and profiles with our roll form department.


There are no CAD drawings and there are no tolerances on the finished dimensions. The major and minor are going to be close to the listed sizes, but the type and grade of material are going to affect the finished results, as well as the wall thickness.


There are no material test reports (sometimes referred to as "material certifications") available for the finished roll-formed material. Test reports are available for most of the original round tubes at an additional cost. Be sure to discuss with your sales representative.

Technical Mechanical Properties

Round Tube Mechanical Properties

Tensile Strength (psi) Yield Strength (psi) Elongation %
110,000 55,000 52

Subscribe to our newsletter

Subscribe for notifications, updates and more!

Created with Sketch.