Misalignment Bushings

Misalignment Bushings

Fits common rod end sizes as supplied by FK Rod Ends & Bearings, except for certain series.

These High Misalignment Bushings (or Spacers) are made from 17-4 PH Stainless Steel and increase the misalignment angle and reduce the hole size in your bearing. High Misalignment Bushings will permit your rod end to swivel through a much wider arc which provides you with a more versatile mechanism. You will also achieve a safer means of mounting a spherical rod end with a high angle of incidence. High Misalignment Bushings are sold by the pair. Certain rod end series and spherical bearings will not accept these misalignment bushings (PMX-T, SJM-T, and SRSM-T are excluded).

Please review the attached pdf for specific part measurements.

All orders are followed up with a phone call from an A.E.D. specialist to discuss your application, or call us at 888-413-0233. Shipping charges are an estimate and subject to change.

SKU Weight per piece Bearing Size Add to Quote
MB 8-6HB
0.25
8
Add to Quote
MB 10-8HB
0.30
10
Add to Quote
MB 10-8HB-2
0.35
10
Add to Quote
MB 12-8HB
0.50
12
Add to Quote
MB 12-10HB
0.50
12
Add to Quote
MB 14-8HB
0.60
14 (NOTE: for FK part numbers RSMX14T, JMX14T-770 and KMX14)
Add to Quote
MB 14-10HB
0.60
14 (NOTE: for FK part numbers RSMX14T, JMX14T-770 and KMX14)
Add to Quote
MB 14-12HB
0.60
14 (NOTE: for FK part numbers RSMX14T, JMX14T-770 and KMX14)
Add to Quote
MB 16-10HB
0.75
16
Add to Quote
MB 16-10HB-2
0.75
16
Add to Quote
MB 16-12HB
0.75
16
Add to Quote

Note: The Typical Mechanical Properties listed have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.