7075-T6 Aluminum Flat & Square Bar

7075-T6 Aluminum Flat & Square Bar

7075 Aluminum: one of the highest strength aluminum alloys used for highly stressed parts where strength is extremely critical, good machinability, excellent strength-to-weight ratio, only average corrosion resistance; improve resistance is normally obtained by cladding parts. Sometimes used in place of 2024.

AED typically stocks 7075 Flat and Square Bars in extruded form (T6511), which meets Federal Specification QQ-A-200/11.

Cold finished (T651), which meets QQ-A-225/9, may also be available on request.

Thickness Width Weight / Foot (lbs) Add to Quote
0.50
1.00
0.606
Add to Quote
0.75
1.00
0.909
Add to Quote
0.75
1.50
1.363
Add to Quote
0.750
2.00
1.818
Add to Quote
0.75
3.00
2.727
Add to Quote
0.75
4.00
3.636
Add to Quote
0.75
6.00
5.454
Add to Quote
1.00
1.00
1.212
Add to Quote
1.00
1.50
1.818
Add to Quote
1.00
2.00
2.424
Add to Quote
1.00
3.00
3.636
Add to Quote
1.00
4.00
4.848
Add to Quote
1.25
1.50
2.274
Add to Quote
1.25
2.00
3.030
Add to Quote
1.25
2.50
3.787
Add to Quote
1.25
4.00
6.059
Add to Quote
1.50
2.00
3.636
Add to Quote
1.50
2.50
4.545
Add to Quote
2.00
2.00
4.848
Add to Quote
2.00
4.00
9.696
Add to Quote
2.50
4.00
12.120
Add to Quote
Property7075-0 Bare7075-T6, T651 Bare7075-0 Alclad7075-T6, T651 Alclad
Tensile Strength (psi)33,00083,00032,00076,000
Yield Strength (psi)15,00073,00014,00067,000
Elongation % in 217111711
1/21611--
Min. 90 Cold Ben Radius for .06400-1T--
Brinell Harness60150--
Ultimate Shearing Strenght (psi)22,00048,00022,00046,000

Note: The Typical Mechanical Properties listed have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.



Related Products