|
|
| 6061-T6 ALUMINUM ROUND BAR |
6061 is one the most versatile of the heat-treatable aluminum alloys. It has good formability and weldability, as well as high corrosion resistance. Additionally, 6061 offers a wide range of mechanical properties and can be fabricated by many of the commonly used techniques. In the T4 condition, fairly severe forming operations may be accomplished. 6061 is the most economical of the heat-treatable aluminums.
AED stocks 6061 in sheet, plate, bar, angle, and tube.
Other items, such as treadplate, channels, pipe, etc. are available upon request. |
Typical Mechanical Properties - 6061 Bar, Sheet, and Plate:
| |
6061-T6 |
6061-T4 |
| Tensile Strength (psi) |
45,000 |
35,000 |
| Yield Strength (psi) |
40,000 |
21,000 |
Elongation % in 2"
.063" Sheet |
12 |
22 |
| 1/2" Round |
17 |
25 |
| Min. 90° Cold Bend Radius for .064" thick |
1-2T |
1/2-1 1/2T |
| Brinell Hardness |
95 |
65 |
| Ultimate Shearing Strength (psi) |
30,000 |
24,000 |
Note: "Typical Mechanical Properties" listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES. |
|
 Meets Federal Specification QQ-A-200/8.
Stocked in 12-foot lengths;
cut pieces available. |
| DIAMETER IN INCHES |
WEIGHT/FOOT (lbs) |
| .250 |
.0577 |
| .312 |
.0902 |
| .375 |
.1299 |
| .500 |
.2309 |
| .562 |
.2922 |
| .625 |
.3608 |
| .750 |
.5205 |
| .875 |
.7071 |
| 1.000 |
.9236 |
| 1.125 |
1.169 |
| 1.250 |
1.433 |
| 1.375 |
1.746 |
| 1.500 |
2.078 |
| 1.625 |
2.439 |
| 1.750 |
2.829 |
| 2.000 |
3.694 |
| 2.250 |
4.676 |
| 2.500 |
5.773 |
| 2.750 |
6.985 |
| 3.000 |
8.312 |
| 3.250 |
9.756 |
| 3.500 |
11.310 |
| 3.750 |
12.990 |
| 4.000 |
14.780 |
| 4.500 |
18.700 |
| 5.000 |
23.090 |
| 5.250 |
25.460 |
| 6.000 |
33.250 |
| 6.500 |
39.020 |
| 8.000 |
59.110 |
|
|
|
 |
|
| Materials |
|
| Parts and Tools |
|
|
|
|
| Services |
|
| Resources |
|
|
|
|
|
|
