|
|
| COMMERCIALLY PURE TITANIUM SHEET, GRADE 2 |
Titanium is an amazingly lightweight metal (approximately 60% of the density of steel) with outstanding corrosion resistance. Its unprecedented strength and high melting point (over 3,000° F), make it an obvious material choice for the aircraft and motorsports industries. In fact, over half the titanium produced is for aerospace alone!
The most popular grades of Titanium are 6AL-4V, also known as Titanium Grade 5; 3AL-2.5V, also known as Titanium Grade 9; and CP Gr2, also known as Commercially Pure Grade 2.
AED occasionally supplies 3AL-2.5V in tubular form, on a special order basis. Often referred to as "3-2", 3AL-2.5V is also known as Grade 9, offering 20-50% higher strength than C.P. grades, but is more formable and weldable then Ti 6AL-4V. Additionally, it has higher Tensile Strength than the strongest unalloyed grade.
AED maintains inventory of titanium in 6AL-4V Round Bar and CP Grade 2 Sheet. Other shapes (including round tube), grades, and dimensions available upon request.
CP GRADE 2 COMMERCIALLY PURE TITANIUM SHEET, or "CP Gr2," is one of the most widely used titanium grades in all product forms. It provides an excellent balance of moderate strength and reasonable ductility. Additionally, CP Grade 2 offers high corrosion resistance in highly oxidizing and mildly reducing environments, including chlorides. CP Grade 2 is typically supplied in the annealed condition, per ASTM B265 Gr2. Also meets ASTM B348. |
Typical Mechanical Properties - Titanium CP Grade2:
| |
|
| Tensile Strength (psi) |
50,000 min |
| Yield Strength, 0.2% Offset (psi) |
40,000 min / 65,000 max |
| Elongation, Min (% in 2") |
20 |
| Reduction of Area, Min. (%) |
30 |
Note: "Typical Mechanical Properties" listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES. |
|
 |
AED stocks CP Grade 2 sheet in several thicknesses.
Stocked in 48" x 120" sheets; cut pieces are available.
CP Grade 2 is typically supplied in the annealed condition, per ASTM B265 Gr2. Also meets ASTM B348.
| THICKNESS |
WEIGHT PER SQ FT (lbs) |
| .020 |
.469 |
| .028 |
.657 |
| .035 |
.822 |
| .050 |
1.174 |
| .063 |
1.479 |
| .080 |
1.850 |
|
COMMERCIALLY PURE TITANIUM, GRADE 2 TUBING
We currently have a size of CP, Grade 2 Titanium Welded Tubing in stock!!
Material meets ASME SB338 and ASTM B 338, and supplies are limited!!
|
|
THEO
ID |
APPROX WEIGHT PER FOOT (LBS)
|
IN-STOCK LENGTHS*
|
SPECIAL INTERNET PRICING* |
1.250 |
.035 |
1.180 |
.2613 |
6 pieces 4';
and 1 piece 3' 7" |
$21.80 per foot |
Please mention that you saw this on our website,
so you receive this special pricing.
Prices are based on taking an entire piece.
*All of these tubes are subject to prior sale.
Shipping and packaging charges are additional.
************************************
************************************
SPECIAL OFFER ON REMNANTS OF CP GRADE 2 SHEET
We have a large selection of various pieces of Commercially Pure Grade 2 Titanium Sheet
in thicknesses from approx .039” to approx .041”
|
This grade of titanium sheet is an aerospace grade, which meets AMS 4902.
It is commonly known as "Commercially Pure, Grade 2" or "CP Grade 2."
It is also sometimes referred to as CP-3.
Sizes listed are subject to change
and supplies are limited.
AED has a $25.00 minimum for material. |
|
|
Length
(in) |
|
Approx Theo. Weight (lb) per pc
|
Special Internet Price (each) ** |
.039 |
3.000 |
69.250 |
1 |
1.321 |
$19.81 |
.039 |
6.000 |
30.000 |
1 |
1.144 |
$17.16 |
.039 |
6.000 |
42.000 |
3 |
1.602 |
$24.03 |
.039 |
6.000 |
48.000 |
10 |
1.831 |
$27.46 |
.039 |
6.000 |
50.000 |
2 |
1.907 |
$28.61 |
.039 |
6.000 |
82.000 |
1 |
3.128 |
$46.91 |
.039 |
7.000 |
38.000 |
2 |
1.691 |
$25.36 |
.039 |
8.000 |
24.000 |
1 |
1.220 |
$18.31 |
.039 |
8.000 |
35.000 |
2 |
1.780 |
$26.70 |
.039 |
8.000 |
59.625 |
1 |
3.032 |
$45.58 |
.039 |
8.000 |
59.750 |
2 |
3.039 |
$45.48 |
.039 |
8.000 |
60.000 |
3 |
3.051 |
$45.77 |
.039 |
8.000 |
70.000 |
5 |
3.560 |
$53.40 |
.039 |
8.000 |
120.000 |
7 |
6.103 |
$91.54 |
|
|
Length
(in) |
|
Approx Theo. Weight (lb) per pc
|
Special Internet Price (each) ** |
.040 |
5.000 |
60.000 |
1 |
1.956 |
$29.34 |
.040 |
5.000 |
78.000 |
1 |
2.543 |
$38.14 |
.040 |
5.875 |
48.000 |
2 |
1.839 |
$27.58 |
.040 |
6.000 |
10.000 |
2 |
.391 |
$5.87 |
.040 |
6.000 |
21.000 |
1 |
.822 |
$12.32 |
.040 |
6.000 |
38.000 |
7 |
1.487 |
$22.30 |
.040 |
6.000 |
48.000 |
2 |
1.878 |
$28.17 |
.040 |
6.000 |
60.000 |
14 |
2.347 |
$35.21 |
.040 |
6.000 |
66.000 |
1 |
2.582 |
$38.73 |
.040 |
7.000 |
40.000 |
2 |
1.826 |
$27.38 |
.040 |
8.000 |
30.000 |
1 |
1.565 |
$23.47 |
.040 |
8.000 |
60.000 |
2 |
3.130 |
$46.94 |
|
|
Length
(in) |
|
Approx Theo. Weight (lb) per pc
|
Special Internet Price (each) ** |
.041 |
3.000 |
120.000 |
8 |
2.406 |
$36.09 |
.041 |
6.000 |
47.000 |
1 |
1.885 |
$28.27 |
.041 |
6.000 |
120.000 |
6 |
|
$72.18 |
.041 |
8.000 |
35.000 |
3 |
1.871 |
$28.07 |
.041 |
8.000 |
40.000 |
3 |
2.139 |
$32.08 |
.041 |
8.000 |
56.000 |
1 |
2.994 |
$44.91 |
.041 |
8.000 |
68.000 |
4 |
3.636 |
$54.53 |
.041 |
8.000 |
70.000 |
1 |
3.742 |
$56.14 |
.041 |
8.000 |
98.000 |
1 |
5.239 |
$78.59 |
.041 |
9.000 |
32.000 |
1 |
1.925 |
$28.87 |
.041 |
9.000 |
48.000 |
1 |
2.746 |
|
.041 |
9.000 |
76.000 |
1 |
4.571 |
$68.57 |
.041 |
9.000 |
120.000 |
1 |
7.218 |
$108.26 |
Please mention that you saw this on our website,
so you receive this special pricing.
Prices are based on taking an entire piece, but we can
shear the longer pieces for economical shipping.
Please contact Dave if you are interested.
**All of these pieces are subject to prior sale.
Interested in a lot of pieces of this material - PLEASE let us know.
We can work with you!
Shipping and packaging charges are additional.
|
|
| |
| 3AL-2.5 TITANIUM, GRADE 9 |
3AL-2.5V, is another well-known grade of titanium, particularly in tubing. It is essentially composed of approximately 3% aluminum, 2.5% vanadium, with most of the remainder pure titanium (there are traces of several other elements). Its light weight and high strength makes it a popular material choice in tubular form. Meets ASTM B337 Gr9, among others.
Many "3-2" items are available by "special order" only. Minimums may apply. |
Typical Mechanical Properties - Titanium 3AL-2.5V:
| |
|
| Tensile Strength (psi) |
125,000 min |
| Yield Strength, 0.2% Offset (psi) |
105,000 min |
| Elongation, Min (% in 2") |
10* |
| *Elongation for materials under .025" may be obtained only by negotiation |
|
|
Note: "Typical Mechanical Properties" listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES. |
|
|
 |
|
| Materials |
|
| Parts and Tools |
|
|
|
|
| Services |
|
| Resources |
|
|
|
|
|
|
