For pricing & availability, contact Dave For technical inquiries, contact Al
 
4130 SHEETS - NORMALIZED & ANNEALED CONDITIONS
4130, also known as "Chrome Moly" (short for chromium molybdenum) is a general purpose steel that has been widely used by the motorsports industries for many years. Weldability, fabrication and mild hardenability make it a popular choice in all forms - tube, bar, sheet, and plate.

Typical Mechanical Properties:

  Annealed Normalized up to
.062" - .187" 		Normalized over
.187" - 1.50"
Tensile Strength (psi) 85,000 max 95,000 min 90,000 min
Yield Point (psi) - 75,000 70,000
Elongation (% in 2") - 8-12 15-18

 

 

 

Note: "Typical Mechanical Properties" listed in this catalog have been compiled from a variety of sources. Information is deemed reliable, but not guaranteed. Data is provided for information only, NOT FOR DESIGN PURPOSES.

UPDATE ON CURRENT MARKET CONDITIONS FOR 4130 NORMALIZED SHEET

Now stocking thicknesses from .025 to .250!

We are pleased to report that we have been able to re-stock all of our standard thicknesses of 4130 sheets in the "Normalized or Otherwise Heat-Treated" condition for everything standard from .025" through .125”. This is the description now for "4130 Normalized, or Condition N," as listed on the Material Test Reports. Until recently, thicknesses .025" and .032" were not available in the Normalized Condition.

Thicknesses above .125" are typically stocked in a hot-rolled ("HR") finish, which means they may have a surface texture. This is very common in these thicknesses.

Other thicknesses may be available on a special order basis
As always, "if you don't see it" ask for it!"

Revised as of July 20, 2005
Thanks from the folks at AED

-----------------------------------------------------------------------

NEW THICKNESS ADDED TO AED'S STOCK OF 4130 SHEETS

AED has recently added another thickness of 4130 sheet to our regular inventory.

.160" is now in stock in both NORMALIZED and ANNEALED conditions!

-----------------------------------------------------------------------

F.O.B. Indianapolis, Indiana 46268 (freight collect)
4130 Sheets Diagram

 

Normalized (also known as Condition "N") meets AMS 6345; Harder and stronger grade
Annealed (also known as Condition "A") meets AMS 6350; Softer and formable grade.

Stocked in full sheets, 36" x 72";
cut pieces available.

THICKNESS WEIGHT/ SQUARE FOOT (lbs)
.025 1.020
.032 1.306
.040 1.632
.050 2.040
.063 2.570
.071 2.897
.080 3.264
.090 3.672
.100 4.080
.125 5.100
.160 6.528
.190 7.752
.250 10.210
.375 15.320
.500 20.420

 
Click on Category to view Product Listing
Materials
Parts and Tools
Services
Resources

 
A.E.D. Motorsport Products
5373 West 86th Street
Indianapolis, Indiana 46268
Phone: 317-334-0569
Fax: 317-879-9397
US Toll-Free Order Line outside Indiana:
888-413-0233 (888 4130 AED)
We offer 4130 chrome moly tube aluminum chromemoly chrome moly chromoly titanium magnesium tungsten stainless carbon alloy products production saw cutting steel aluminum race hose ends flare reducers and adapters race hose tools brass lead ballast Threaded Clevises FK rod ends & engine safes cleaners & polishes Fragola AN A-N fittings